The production of artificial stone has become today one of the important and required industries for the advanced construction industry, which mainly depends on designs and creativity in the art of architecture, as it provides all the requirements that satisfy everyone due to its many shapes, colors and sizes and its resistance to all different climatic factors. That is if it is made in the right way, and it is also distinguished by its reasonable prices when compared with natural stone, and it is also characterized by the abundance and quality of production.

Industrial Walls

 Industrial stones 

Industrial stone, which is required for the advanced construction industry, which depends mainly on designs and creativity in architecture. It provides all its forms, colors, sizes, colors and sizes for all external factors. Also the production and its quality. Artificial stone is used for exterior construction and interior decoration for border cladding and gardens. Arches and columns are made. Artificial stone and industrial tiles are the most common exterior cladding materials in the Arab Gulf region for the following reasons
Charging prices
It is possible to improve the properties of these infected materials
Multicolor
The yield is comparable to large samples
polymorphism
Several specifications make artificial cladding work superior to the use of natural tiles

 

Chemicals used to adhere wall tiles to clamshell

Syutex (U): It is a cement-like substance to which a percentage of water is added, and it is pasted over the plastered walls with a serrated knife and for the leveling, the rubber hammer is used when gluing, plastic cores are used to define the seams and a cohesive white cement mortar

How to stick wall tiles

The splash of the surface to be paved by Al-Labani cement mortar
Spray the wall with water after cleaning it well from protrusions and growths
Putting the leg in the horizontal plane and adjusting it to adjust it horizontally below the wall, which is called the wall
Tightening the thread by means of a punch nail located at the corners of the wall to be tiled vertically and from the first and last slab. Tightening the thread horizontally and tiling the wall from bottom to top. The reason for the tension of the thread is horizontal that no bending appears in the tiles
Discharging the seams by the wire brush
Irrigation process by dry cement mortar

Technical data

alt=""

Spanish Walls
Code : C-01
Dimensions (cm) 50×22
Blocks/m2 : 42
Colors : All Colors

alt=""

Classic Walls
Code : C-02
Dimensions (cm) 48×24
Blocks/m2 : 40
Colors : Light Beige – Dark Beige

alt=""

Mount Face Walls
Code : C-03
Dimensions (cm) 50×22
Blocks/m2 : 40
Colors : Light Beige – Dark Beige

alt=""

 Stone Walls
Code : C-04
Dimensions (cm) 55×30
Blocks/m2 : 40
Colors : Light Beige – Dark Beige

alt=""

Sea Wave Walls
Code : C-05
Dimensions (cm) 60×30
Blocks/m2 : 40
Colors : Light Beige – Dark Beige

alt=""

Boxes Walls
Code : C-06
Dimensions (cm) 60×30
Blocks/m2 : 40
Colors : Light Beige – Dark Beige